GT17 / TB25 Hyundai Turbocharger Bearing Housing 733952-0001 434578-0014

Garrett   GT 20 / GT 17 / TB25   733952-0001 454054-0001 fit KIA / Hyundai turbocharger bearing housing

       PRODUCT        DETAILS     

► Model  :   TB25   /   GT 17  /   GT20

► Fitted Turbocharger :

703389-0001    703389-0002    466501-0002    466501-0003

466501-0004    466501-0005    471037-0001    471037-0002

471189-0001    700273-0001    700273-0002    700917-0001

708337-0001    708337-0002    708337-0004    715843-0001

715924-0001    715924-0002    715924-0003    715924-0004

716938-0001    702213-0001    710060-0001    733952-0001 

454054-0001    454054-0002    454059-0004

► SN NO. :   434578-0014   /   435889-0003   /   434578-0012

► Material :  HT250 Gray Iron

► Application :  Hyundai        Mighty Truck /  Chrorus  BUS  /  H-100 Light  Truck

                               Hyundai        H1  BOX 2.5 CRDI   /   Starex  2.5  CRDi

                                          KIA              Sorento

► Package :  anti-rust paper + plastic bag + PE foam + corrugated box

► Cooling mode : Water  Cooling

   PRODUCT      SHOW    

The bearing housing is what supports the entire system and routes the oil to the bearings. Usually made

of cast iron, the bearing housing can be air and oil cooled, or in many cases such as automotive use, it

contains water jackets to allow for watercooling.

The bearing housing also houses all of the other small parts critical to turbo operation, such as the gas

sealing system and oil control mechanisms. It also contains design features that insulate heat from the

turbine from migrating into the lube oil and cooking it after engine shut down.

Our NEW replacement bearing housings are cast in only the finest materials and are finished in OE

specification. Unless stated, all housings are a direct replacement for the original.

    OUR    ADVANTAGES    

 
       TIAN       HISTORY     

1995 - Tain turbo was established , covers an area of 4,000 square meters,owns

complete production lines for compressor wheel,compressor housing,and turbo shafts.

2005 - Tain applied advanced PLC-6 low-pressure casting equipment.

2010 - Tain set up foreign trade department,specialized in exporting turbochargers,cartridges and other turbo parts,like shafts,compressor wheels,repair kits,ect.

2010 – Tain cooperated with several big dealers and distributers from German ,and develop a variety of VNT turbocharger.

2012 – Tain entered the south America market,and won a good reputation for our good quality,complete product chain and sincere service.

2015 - Tain applied SCHENCK TB Sonio-core assembly balancing equipment,and other testing equipments to establish a final product quality assurance system.

2017 – Tain imported a 5-axis equipment – MAKINO L2. We have a production line of billet compressor wheels now.

turbocharger bearing

water cooled bearing housing

GT17 / TB25 Hyundai Turbocharger Bearing Housing 733952-0001 434578-0014 Images